Oldsmobile 400 425 455 Rocker Stud Girdle Kit Blue With Polylock Nuts [OEM Head]

Brand:	Speedmaster
Part Number:	PCE259.1014
Part Type:	Rocker Arm Stud Girdle
Stud Girdle Attachment Style:	Clamp-on
Rocker Arm Nuts Included:	Yes
Rocker Arm Nut Thread Size:	7/16-20 in.
Rocker Arm Nut Style:	Polylock
Minimum Rocker Slot Width (in):	0.600 in.
Tall-Style Valve Covers Required:	Yes
Stud Girdle Material:	Aluminum
Stud Girdle Finish:	Blue anodized
Quantity:	Sold as a kit.
Note:	OEM Cylinder head Stud Spacing

These CNC-machined PCEstud girdles help control valve lift and timing changes due to stud flex, allowing for more consistent high-rpm performance. Each stud girdle is anodized and comes with high-quality mounting hardware and hardened adjusting nuts. Tall-style valve covers are required. The best thing you will ever do for your engine is to put a set of stud girdles on it. This stabilizes the valve train, and allows for full lift. Studs will flex on an engine at high rpm, when running cams that are higher than stock, and those running roller cams with higher spring pressures, must have these. We never build an engine without installing a set of these. Takes no additional time to install than when installing roller rockers. It's an absolute fact that studs will flex at mid to high rpm. It happens in an erratic fashion, causing loss of engine smoothness, hp, and slower acceleration. For the low cost, we have them for these are a must. Besides gaining 5-10 hp one more noticeable difference is that the engine will accelerate and decelerate faster. These are truly essential for engines with cams above stock. Stud girdles also act as a baffle to redirect oil back down on the valve train components. This is very important since most tall valve covers on the market have no baffles. Ever notice how the baffles are located in many factory valve covers. They are serious about getting the oil that is pumped up from the pushrods redirected to the moving parts in the head. These do a fabulous job of that.